Rolling Service Doors Model 926 & 900
Models 900 and 926 Rolling Steel Service Doors are economical, secure solutions to protect facility openings. These rolling steel service doors are composed of flat-faced slats that provide a natural watershed, helping to reduce corrosion.
Reliable & Durable Rolling Service Doors
Slats are designed with free-acting interlocking joints that permit easy articulation when the door coils. The Wayne Dalton Model 900 and 926 Rolling Service Door are ideal for jobs where an economical solution for durability and strength is needed. Model 900 offers flexibility in curtain materials with choices of stainless steel, or aluminum while Model 926 comes in curtain material, galvanized steel.
Rolling Service Doors Model 926 & 900
They are popular in virtually any interior and exterior commercial or industrial applications where durability and strength are needed for even the most critical projects.
High-Quality Design
- The counterbalance assembly consists of a spring barrel which serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils.
- Features a strong double-angle bottom bar that reinforces the lower edge of the curtain against wind pressure and permits varied lock, astragal, and safety edge options. It is designed for easy installation and does not require fasteners in the guide openings, so the bottom bar does not interfere with door operation.
- Zinc-plated, cast-iron wind locks add strength and prevent lateral slat movement.
- Designed for easy installation and does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation.
Warranty
- 24-Months Limited Warranty on all product parts and components
Wind load:
Wind load up to +/- 55 psf
Available with WindSafe® wind load reinforcement built to withstand specific high-wind pressures to meet local building codes.
Ideal Applications Include
Warehouses / Manufacturing
Parking Garages
Public Facilities
Shipping and Receiving Docks
Food and Beverage Facilities
Government Buildings
Model Comparison
Standard Construction | Model 926 | Model 900 |
| Max. Width* | 12′ | 14′ |
| Max. Height* | 12′ | 14′ |
| Mounting | Face mount; between jambs | Face-of-wall; between jambs |
| Curtain Material | 2″ flat slats (#17 profile) 26-gauge steel with alternating end-locks | 2″ galvanized steel curved slats (#2 profile) 24-gauge steel with alternating end-locks |
| Operation | N/A | Manual push-up; chain hoist where door weight exceeds manual effort |
| Counter Balance | Counterbalance barrel assembly is made from 4” steel pipe | Steel pipe of adequate size to restrict a maximum deflection of .033″ per linear foot |
| Helical Spring Cycles | 20,000 | 20,000 |
| Guides | G-guide design; Roll-formed steel channel | G-guide design |
| Bottom Bar | Galvanized steel, double angle design with bottom astragal | Galvanized steel double angle with weatherstrip |
| Brackets | 1/4″ or 3/16″ steel plates with permanently sealed ball bearings | 1/4″ or 3/16″ steel plates with permanently sealed ball bearings |
| Hood | N/A | 24-gauge galvanized steel round hood |
| Exterior | Galvanized steel | Steel, Aluminum, Stainless steel |
| Wind Load (optional)*** | Yes | Yes |
Rolling Service Doors Model 926 & 900 Design Options
No. 2 – Model 900
Standard:
- Curved-faced single crown slat
Available:
- Up to 20-gauge steel
- Up to 20-gauge stainless steel
- Up to 18-gauge aluminum (mill, clear or bronze anodized)
Pitch*: 1.9
No. 17 – Model 900
Standard:
- Flat-faced slat
Available:
- Up to 20-gauge steel
- Up to 20-gauge stainless steel
- Up to 16-gauge aluminum (mill, clear, or bronze anodized)
Pitch*: 1.6
Secur-Vent® – Model 900
Standard:
- Perforated Slat with 1/16″ diameter holes
- 20-gauge steel or stainless steel
- Offers 20-25% open area over slat
Available:
- No. 17 Flat Slat up to 14’ wide by 12’ high
Pitch*: 1.6
No. 17 – Model 926
Standard:
- Flat-faced slat
Available:
- 26-gauge galvanized steel
Pitch*: 1.6
Vision Options
- 3″ flat slat
- Perforated/Fenestrated flat slat
- 6″ curved slat
- Open fenestrations
- Vision lites
Guides
- Three angles: galvanized steel, stainless, aluminum, hot dipped galvanized (structural steel angle only)
Hood
- 22-gauge steel
- Square hood
Perimeter Seal Options
- angled guide brush seal
- vinyl guide seal
- exterior lintel weather seal
- interior lintel weather seal
- internal hood baffle
- Rubber hood baffle
Bottom Bar Options
- Double angle
- Extruded aluminum angle
- Structural steel angle (galvanized steel only)
- Sloped
Colors
White
Gray
Beige
Brown
Curtain Finish
- Anodized Aluminum
- mill, clear, or bronze
- Stainless steel #4
- Powdercoat – RAL and custom
- Painted Gray
- Vision lites
Finish Options
- Stainless steel
- Aluminum
- Powder Coat
Hood/Guide/Brackets/Bottom Bar Finish
- Primed Black
- Anodized Aluminum- mill, clear or bronze
- Stainless steel #4
- Powdercoat – RAL and custom
- Galvanized
- Bare galvanized
Curtain Finish
Mill
Clear
Bronze
RAL Powder Coat*
Approximately 200 powder coat options are available to complement the exterior colors of a building.
*Online color swatches are only digital reproductions of actual standards and will vary in appearance due to differences in monitor and video card output. These digital representations should not be used to finalize color selection(s).
Wayne Dalton’s Rolling Service Door Collection
Wayne Dalton’s Rolling Service Door Collection
Call us today at (519) 735-7790
Or Send Us an Email on the Form
Get A Quote Today
Only fill out this form if you are in the Windsor, Ontario Canada area…for all other areas in Canada and the U.S.A., please go to Wayne Dalton Dealer Finder and you will find a dealer in your area.
Wayne Dalton Sales Center of Windsor – 13425 Desro Dr, Tecumseh, ON N9K 0B7, Canada
Call us today at (519) 735-7790
Or Send Us an Email on the Form
Get A Quote Today
Only fill out this form if you are in the Windsor, Ontario Canada area…for all other areas in Canada and the U.S.A., please go to Wayne Dalton Dealer Finder and you will find a dealer in your area.
Wayne Dalton Sales Center of Windsor – 13425 Desro Dr, Tecumseh, ON N9K 0B7, Canada