Rolling Service Doors Models 800 & 800C
The Wayne Dalton Rolling Service Doors Models 800 & 800c is designed to meet the tough requirements of virtually any commercial or industrial application. Model 800 and ThermoTite® 800C offer flexibility in substrate materials with choices of galvanized or prime steel, stainless steel, or aluminum. Color options range from our four standard factory-finish colors to approximately 200 RAL powder coat choices.
Designed To Meet The Needs of The Most Rugged Applications.
Popular in interior and exterior applications, Our Model 800 rolling service door comprises curved or flat-faced slats that provide a natural watershed, helping to reduce corrosion. The slats have free-acting interlocking joints that permit easy articulation when the door coils. Model 800C has foamed-in-place polyurethane insulation with an R-value* of 7.7 to fill the slat to enhance a building’s thermal efficiency. The slats have free-acting interlocking joints that permit easy articulation when the door coils.
Rolling Service Doors Models 800 & 800C
Rolling Service Door Model 800 features a strong double-angle bottom bar for easy installation. It does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation. Model 800C features a strong double-angle bottom bar designed for easy installation. The guide openings do not require fasteners, so the bottom bar does not interfere with door operation.
ThermoTite® 800C – R-value* of 7.7
Wind Load Options
- Wind locks alternating or continuous with windbar.
- Articulating Windlocks for Operational Wind Load.
- Options available to meet up to Dade County – Florida Building Commission High-Velocity Hurricane Zone (FBC HVHZ)
Wind Load: ±20 psf standard; options up to ±55 psf
Ideal Applications Include
Industrial, Warehouses & Manufacturing
Loading Docks
First Responder Facilities
Shipping and Receiving Docks
Municipal Buildings
Retail & Commercial Facilities
Model Comparison
Model 800 | Model 800C | |
|---|---|---|
| Max Width* | 40’ | 42’ |
| Max Height* | 40′ | 40′ |
| Max Steel Gauge: | 16 | 16 |
| Construction | Steel, Aluminum or Stainless steel | Steel, Aluminum or Stainless Steel |
| Slats | Heavy-duty 3″ flat or curved | Heavy-duty 3″ flat or curved |
| Wind load Options | ±20 psf standard; options up to ±55 psf | ±20 psf standard; options up to ±55 psf |
| Bottom Bar | Double-angle bottom bar reinforces the lower edge of the curtain | Double-angle bottom bar reinforces the lower edge of the curtain |
Rolling Service Doors Models 800 & 800C, Design Options.
Slat Profiles: 800
No. 14 Slat Profile Secur-Vent®
No. 14 Slat Profile Ventilated
Slat #4, Curved-faced single crown slat
Slat No. 14, Flat-faced slat
Slat Profiles: 800C
No. 34 Slat Profile
No. 4 – Model 800
No. 14 – Model 800
Secur-Vent® – Model 800
No. 34 – Model 800c
Colors
White
Gray
Beige
Brown
RAL Powder Coat*
Approximately 200 powder coat options are available to complement the exterior colors of a building.
*Online color swatches are only digital reproductions of actual standards and will vary in appearance due to differences in monitor and video card output. These digital representations should not be used to finalize color selection(s).
Wayne Dalton’s Rolling Service Door Collection
Wayne Dalton’s Rolling Service Door Collection
Call us today at (519) 735-7790
Or Send Us an Email on the Form
Get A Quote Today
Only fill out this form if you are in the Windsor, Ontario Canada area…for all other areas in Canada and the U.S.A., please go to Wayne Dalton Dealer Finder and you will find a dealer in your area.
Wayne Dalton Sales Center of Windsor – 13425 Desro Dr, Tecumseh, ON N9K 0B7, Canada
Call us today at (519) 735-7790
Or Send Us an Email on the Form
Get A Quote Today
Only fill out this form if you are in the Windsor, Ontario Canada area…for all other areas in Canada and the U.S.A., please go to Wayne Dalton Dealer Finder and you will find a dealer in your area.
Wayne Dalton Sales Center of Windsor – 13425 Desro Dr, Tecumseh, ON N9K 0B7, Canada