Roll-Up Sheet Doors DS Series
Our DS Series Roll-Up Sheet doors are designed to be versatile, durable, and easy to operate. Each door in the DS Series is constructed with hot-dipped, galvanized steel, and with your choice of locking mechanisms, this coiling door has no problem securing an area.
Designed to be Versatile, Durable, and Easy to Operate.
Roll-Up Sheet Doors DS Series
It uses a heavy-duty axle and counterbalancing system paired with steel oil-tempered springs to ensure easy operation. Your sheet door will roll up and down easily for smooth cycle performance. With a variety of colors, options, and sizes to choose from, these doors will fit your commercial door needs. Wayne Dalton delivers superior quality self-storage roll-up doors and services ideal for any self-storage facility or small building application.
High-Quality Design
- Heavy-duty steel axle supports door curtain and counterbalance system
- Stepped rings allow tight, uniform curtain wrap and minimize headroom requirements
- Tension-Pro adjustable spring device allows for adjustment of spring tension
- Factory-installed polypropylene anti-wear strip on the guide provides for quiet operation and less wear
- The corrugated top sheet assembly forms a strong torque cylinder for strength and easy operation and conceals the spring mechanism
Benefits
Thermal Performance
- Flexible vinyl top and side draft stop acting as weather seals to control heat gain or loss.
Installer Friendly
- A rigid support bracket with bearings holds constant door tension and allows easy adjustments
- Extruded aluminum guides allow for easy installation of masonry or steel with no special preparation or overhead tracks needed)
Warranty
- 12-Months Limited Warranty on all product parts and components
Enhancements
Operation
- Direct-drive chain hoist for door sizes up to 12’x12.’
- 4:1 reduce-drive chain hoist available for door sizes up to 12’1”x16’0”
- Steel mounting plates provide a lateral extension of jambs
- The electric operator kit adapts any door to motorized operation
Safety Focused
Locking Options
- Curtain
- Two-bolt double shackle
- Cylinder
High-Performance Design
- Rust-resistant mini curtain lock allows access from outside
- Sliding curtain lock for securing the door from the exterior
Available with WindSafe® wind load reinforcement built to withstand specific high-wind pressures to meet local building codes.
*Proper door selection is the responsibility of the homeowner.
Ideal Applications Include:
- Mini-storage Buildings
- Loading Docks
- Service Buildings
- Outbuildings
- Large Storage Facilities
Documents:
- Rolling Sheet Doors 50 75 100 200 350 Brochure
- Rolling Door End User Manual
- Multi-Family Housing Applications
- Roll-Up Sheet Doors Warranty – Model DS-350
- Installation Instructions – Model DS-350
- Installation Insert – Models DS-200 and DS-350
- Wind Load Options – DS75, DS100, DS 350, 770ss & 790cw
- Model DS-350 Shop Drawing
Standard Construction | DS – 50 | DS – 75 | DS – 100 | DS – 200 | DS – 350 |
|---|---|---|---|---|---|
| Max. Width* | 12′ | 10” | 10” | 16′ | 16′ |
| Max. Height* | 6′ | 10’′ | 10′ | 16′ | 16′ |
| Max. Steel Gauge | 26 | 26 | 26 | 26 | 26 |
| Material | Galvanized Stee | Galvanized Stee | Galvanized Stee | Galvanized Stee | Galvanized Stee |
| Operation | Manual | Manual | Manual | Manual, Chain Hoist | Manual, Chain Hoistl |
| Locking | Side Bolt or Curtain Loc | Curtain Loc | Side Bolt or Curtain Loc | Side Bolt or Curtain Loc | Side Bolt or Curtain Loc |
| Guides | No | ||||
| Guides | No | 18-gauge | 18-gauge | 14-gauge | 13-gauge |
| Bottom Bar | Extruded aluminum | Roll-formed galvanized steel | Extruded aluminum | Extruded aluminum | Extruded aluminum |
| R-Value* (optional) | No | 4 | 4 | 4 | 4 |
| Wind Load** (optional) | No | Yes | Yes | No | No |
Roll-Up Sheet Doors DS Series Color Options
Finish Options:
*Online color swatches are only digital reproductions of actual standards and will vary in appearance due to differences in monitor and video card output. These digital representations should not be used to finalize color selection(s).
Actual physical representation may vary slightly in color.
**10-year warranty against chalk and fade
***20-year warranty on every other color against chalk and fade
White***
Mist White***
Silhouette Gray***
Yellow
Sunset Orange
Polar Blue
Cedar Red
Desert Tan***
Bronze
Valentine Red
Patriot Red
Fern Green
Continental Brown
Hunter Green
Harvest Orange**
Maroon**
Purple**
Bright Green***
Buckskin***
Royal Blue
Ultra Blue
Teal
Black
Commercial Rolling Sheet Door Collection
Call us today at (519) 735-7790
Or Send Us an Email on the Form
Wayne Dalton Sales Center of Windsor – 13425 Desro Dr, Tecumseh, ON N8N 2L9, Canada
Get A Quote Today
Only fill out this form if you are in the Windsor, Ontario Canada area…for all other areas in Canada and the U.S.A. please go to Wayne Dalton Dealer Finder and you will find a dealer in your area.