Genie Commercial Light Duty Couner Operator

Genie’s Light Duty Counter Operator is designed for rolling counter doors that have a limited-duty cycle requirement. The GCX comes with advanced features and is available in a five-door version that raises the bar in counter-door operation.

Innovative Features and Reliable Performance Come Standard

Genie’s automatic door operators are manufactured to meet the performance requirements of most commercial and industrial doors, offering precise control of your door system for years of trouble-free operation. We offer a broad line of electric door operators which suit new construction or retrofit applications, as well as unusual or special requirements. Genie commercial operators are UL 325-2010 compliant.

Light Duty Couner Operator

GCL-GCX – Light Duty Couner Operator

The GCL-GCX is designed for rolling counter doors that have limited-duty cycle requirements. The GCX comes with advanced features and is available in a five-door version that raises the bar in counter-door operation.

Commercial Operators - Wayne Dalton of Windsor Garage Doors & Service

GCL-GCX Advantage

Modular design with optional expansion boards for a timer to close* and auxiliary output functionality.

Worm gear primary drive reduction provides inherent mechanical braking.

Completely enclosed drive allows for mounting below 8 feet; maintains UL 325 approval.

Motor with built-in thermal protection.

LCD display with intuitive setup menu. Provides real-time status and troubleshooting assistance.

Open/close/stop and setup keys included on the control board. Keeps all setup controls near the LCD display convenient for set up.

EZ Limit® provides for push-to-set limits that remain synchronized with the door even during loss of power and mechanical drops on fire-door versions.

* Advanced timer to close expansion board cannot be used in the fire counter door model.

Standard Features
  • Limited-duty 4 cycles per hour rating.
  • Max run timer automatically adjusts to up and down run time.
  • Worm gear primary reduction.
  • Delay on reverse.
  • 16-character LCD display.
  • UL 325 2010 approved.
  • 3-button control station.
  • 2-year/20,000 cycle warranty.
  • Programmable mid-stop.
  • Pull cord release for emergency manual operation.
UL 325 2010 Approved

Allows for monitored entrapment connections for protection and momentary operation when used with select photo eyes and/or edge-sensing devices.

Construction

Motor

  • 1/2 HP, AC capacitor start/run the motor. Motor replaceable without changing limits.

Drive

  • Primary reduction is a worm gear. Secondary reduction is by hardened bevel gear. Powertrain incorporates oil-impregnated bushings.

Governer (Fire Door Version Only)

  • Included on fire door operator version. Controls the descent of the door in a non-powered alarm/test drop.

Emergency Manual Operation

  • Pull cord disconnect disengages drive allowing the door to be moved manually while maintaining limits.

Pre-wired to accept

  • Monitored entrapment devices such as photo eyes. Single or 3-button control stations. External interlock switches.

Accessories and Options

Hand Crank

  • Allows for opening/closing via hand crank. The option is only available on non-fire counter-door models.

Timer to Close Module**

  • Timed close-set via the LCD display from 2 seconds up to 5 minutes. Includes pre-close warning contacts, timer hold input, auxiliary open input, normally closed safety input, and monitored edge input.

Auxiliary Output Module (standard on fire door version)

  • Provides relay contacts at the open, close, and mid-stop limits. Contacts for 5-minute lamp, and “ADA” contacts set via LCD display to warn during opening, closing or both.

UL 325 2010 Approved Reversing Devices

  • The installation of a monitored external entrapment device is required for momentary contact close operation on all commercial door operators. Only the following devices, when purchased through Genie, are UL-approved for use to meet this requirement: Safe-T-Beam® Photoeye Kit with adjustable bracket P/N 38176R.S¹
  • Impact-protected Commercial Photoeye Kit P/N OPAKPE2.S
  • MillerEdge ME/MT/CPT (DC or T3) 2-wire edge sensor. Must be used with TCM (OPABTCGX.S) or Interface Module (OPAKMEIX.S).
  • NEMA 4 Photoeyes P/N OPAKPEN4GX.S
  • Light Curtain 3 ft. length P/N OPAKMLC3.S, or 6 ft. length P/N OPAKMLC6.S

1 — Default device when the operator is ordered.

Designer Fiberglass Garage Doors - Wayne-Dalton Windsor, Tecumseh

View Our Gallery

Call us today (519) 735-7790

Wayne Dalton Sales Center of Windsor – 13425 Desro Dr, Tecumseh, ON N8N 2L9, Canada

Get A Quote Today

If you need help selecting a garage door, opener, have product questions or would like to request a quote or schedule a garage door repair service. Contact us today at +1 (519) 735-7790 or send us an email on the form below.