Rolling Service Doors Model 926 & 900
Wayne Dalton Rolling Service Doors Models 926 and 900 deliver dependable security, durability, and everyday performance for commercial, industrial, and institutional buildings. These rolling steel doors suit smaller commercial openings that need a reliable, economical service door.
Security & Durability Rolling Service Doors
Both models protect commercial openings from unauthorized access while providing reliable daily operation. Galvanized components and durable steel construction help the doors withstand the demands of commercial environments.
Depending on the configuration, available security features can include slide bolts, cylinder locks, and other locking options.
Model 926 – Rolling Service Door
The Model 926 is a compact rolling steel door designed for commercial and light-industrial applications. Its durable curtain and straightforward operation make it a practical choice for service openings, storage areas, and utility spaces. Its compact design suits applications with limited overhead space and opening size.
Model 900 – Rolling Service Door
The Model 900 provides a heavier-duty rolling service door solution for commercial applications that require greater durability and security. Its rolling steel curtain provides a strong barrier while allowing the door to be stored above the opening when raised.
Rolling Service Doors Model 926 & 900
They are popular in virtually any interior or exterior commercial or industrial application where durability and strength are needed, even for the most critical projects.
Why Choose Wayne Dalton Models 926 & 900?
The Wayne Dalton Model 926 and Model 900 provide practical rolling-door solutions for businesses that need security, durability, and dependable operation without necessarily requiring the advanced high-cycle features of the 800 HC or 800 ADV systems.
For smaller commercial openings, the Model 926 can be a practical choice, while the Model 900 offers a versatile solution for broader commercial and industrial service-door applications.
High-Quality Design
- The counterbalance assembly consists of a spring barrel which serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils.
- Features a strong double-angle bottom bar that reinforces the lower edge of the curtain against wind pressure and permits varied lock, astragal, and safety edge options. It is designed for easy installation and does not require fasteners in the guide openings, so the bottom bar does not interfere with door operation.
- Zinc-plated, cast-iron wind locks add strength and prevent lateral slat movement.
- Designed for easy installation and does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation.
Warranty
- 24-Months Limited Warranty on all product parts and components
Wind load:
Wind load up to +/- 55 psf
Available with WindSafe® wind load reinforcement built to withstand specific high-wind pressures to meet local building codes.
Ideal Applications Include
Warehouses / Manufacturing
Parking Garages
Public Facilities
Shipping and Receiving Docks
Food and Beverage Facilities
Government Buildings
Model Comparison
Standard Construction | Model 926 | Model 900 |
| Max. Width* | 12′ | 14′ |
| Max. Height* | 12′ | 14′ |
| Mounting | Face mount; between jambs | Face-of-wall; between jambs |
| Curtain Material | 2″ flat slats (#17 profile) 26-gauge steel with alternating end-locks | 2″ galvanized steel curved slats (#2 profile) 24-gauge steel with alternating end-locks |
| Operation | N/A | Manual push-up; chain hoist where door weight exceeds manual effort |
| Counter Balance | Counterbalance barrel assembly is made from 4” steel pipe | Steel pipe of adequate size to restrict a maximum deflection of .033″ per linear foot |
| Helical Spring Cycles | 20,000 | 20,000 |
| Guides | G-guide design; Roll-formed steel channel | G-guide design |
| Bottom Bar | Galvanized steel, double angle design with bottom astragal | Galvanized steel double angle with weatherstrip |
| Brackets | 1/4″ or 3/16″ steel plates with permanently sealed ball bearings | 1/4″ or 3/16″ steel plates with permanently sealed ball bearings |
| Hood | N/A | 24-gauge galvanized steel round hood |
| Exterior | Galvanized steel | Steel, Aluminum, Stainless steel |
| Wind Load (optional)*** | Yes | Yes |
Rolling Service Doors Model 926 & 900 Design Options
No. 2 – Model 900
Standard:
- Curved-faced single crown slat
Available:
- Up to 20-gauge steel
- Up to 20-gauge stainless steel
- Up to 18-gauge aluminum (mill, clear or bronze anodized)
Pitch*: 1.9
No. 17 – Model 900
Standard:
- Flat-faced slat
Available:
- Up to 20-gauge steel
- Up to 20-gauge stainless steel
- Up to 16-gauge aluminum (mill, clear, or bronze anodized)
Pitch*: 1.6
Secur-Vent® – Model 900
Standard:
- Perforated Slat with 1/16″ diameter holes
- 20-gauge steel or stainless steel
- Offers 20-25% open area over slat
Available:
- No. 17 Flat Slat up to 14’ wide by 12’ high
Pitch*: 1.6
No. 17 – Model 926
Standard:
- Flat-faced slat
Available:
- 26-gauge galvanized steel
Pitch*: 1.6
Vision Options
- 3″ flat slat
- Perforated/Fenestrated flat slat
- 6″ curved slat
- Open fenestrations
- Vision lites
Guides
- Three angles: galvanized steel, stainless, aluminum, hot dipped galvanized (structural steel angle only)
Hood
- 22-gauge steel
- Square hood
Perimeter Seal Options
- angled guide brush seal
- vinyl guide seal
- exterior lintel weather seal
- interior lintel weather seal
- internal hood baffle
- Rubber hood baffle
Bottom Bar Options
- Double angle
- Extruded aluminum angle
- Structural steel angle (galvanized steel only)
- Sloped
Colors
White
Gray
Beige
Brown
Curtain Finish
- Anodized Aluminum
- mill, clear, or bronze
- Stainless steel #4
- Powdercoat – RAL and custom
- Painted Gray
- Vision lites
Finish Options
- Stainless steel
- Aluminum
- Powder Coat
Hood/Guide/Brackets/Bottom Bar Finish
- Primed Black
- Anodized Aluminum- mill, clear or bronze
- Stainless steel #4
- Powdercoat – RAL and custom
- Galvanized
- Bare galvanized
Curtain Finish
Mill
Clear
Bronze
RAL Powder Coat*
Approximately 200 powder coat options are available to complement the exterior colors of a building.
*Online color swatches are only digital reproductions of actual standards and will vary in appearance due to differences in monitor and video card output. These digital representations should not be used to finalize color selection(s).
Wayne Dalton’s Rolling Service Door Collection
Call us today at (519) 735-7790
Or Send Us an Email on the Form
Get A Quote Today
Only fill out this form if you are in the Windsor, Ontario Canada area…for all other areas in Canada and the U.S.A., please go to Wayne Dalton Dealer Finder and you will find a dealer in your area.
Wayne Dalton Sales Center of Windsor – 13425 Desro Dr, Tecumseh, ON N9K 0B7, Canada